Sabb G valve seats and guides

Calypso:
 
Bill Miller, Sabb America in Florida is the only dealer in the U.S. now. 888-301-1706  Sabb stopped producing the engine in 2002 after 46 years of producing the G engine.  The valve guides are probably specific to Sabb.  Bill Miller stocks both the shop and owners manual.  The owners manual is almost a shop manual.  Parts are readily available throughout the world.
 
When your prop is fully feathered, is there still some pitch left in the prop???
 
Rod
 

Hi Rod:

 

Basically no  a little bit of pitch visible on either side, blades twisted (pretty much feathers perfectly)  only way to adjust pitch completely is to cut the shaft at the coupling.\

 

Best,

Jeremy

 

-----Original Message----- From: Rod Bruckdorfer [mailto:seagypsy@att.net] Sent: Monday, April 26, 2004 3:04 PM To: bcc@yahoogroups.com Subject: [bcc] Sabb G valve seats and guides

 

Calypso:

 

Bill Miller, Sabb America in Florida is the only dealer in the U.S. now. 888-301-1706  Sabb stopped producing the engine in 2002 after 46 years of producing the G engine.  The valve guides are probably specific to Sabb.  Bill Miller stocks both the shop and owners manual.  The owners manual is almost a shop manual.  Parts are readily available throughout the world.

 

When your prop is fully feathered, is there still some pitch left in the prop???

 

Rod

 

BRISTOL CHANNEL CUTTER OWNERS ASSOCIATION Mail List Home:  http://groups.yahoo.com/group/bcc BCC Owners Home: http://www.geocities.com/bccowners Post message:    mailto:bcc@yahoogroups.com Subscribe:       mailto:bcc-subscribe@yahoogroups.com Unsubscribe:     mailto:bcc-unsubscribe@yahoogroups.com List owner:      mailto:bcc-owner@yahoogroups.com