Running Rigging

BCC Forum
1

Hello,

Does anyone out there have the lengths and line diameters for all of the running rigging on a factroy BCC, completely factory built.
I have hull #91, Crystal Swan II, and want to replace all of the running rigging. Unfortunately I am in the middle of a major refit and a lot of my lines are in a storage unit while I refinish my mast and boom. I want to order new running rigging now so that I have it when I am ready to re-step the mast.

I would appreciate any input I could get for any or you out there.

Steve
sosborne@ies.net

Free Web-based e-mail groups by eGroups.com

2

Steve,

I think this is what you are looking for…

Mainsheet - 1/2" - 96’
Jib top sheet 1/2" - 96’
Staysail sheet - 1/2" - 55’
Reacher sheet - 7/16" - 115’
Main Halyard - 7/16" - 80’
Jib Halyard - 7/16" - 85’
Staysail Halyard - 7/16" - 60’
Reacher Halyard - 3/8" - 100’
Down Haul - 5/16" - 60’
Topping Lift - 5/16" - 80’
Jib Furl - 5/16" - 60’
Main Reef Stops - 5/16" - 60’
Boom Vang - 3/8" - 40’
Lazy Jacks - 1/4" - 13’, 14’6", 13’6", 15’

Tom Walker
bcc95@worldnet.att.net

-----Original Message-----
From: sosborne@iserv.net <sosborne@iserv.net >
To: bcc@egroups.com <bcc@egroups.com >
Date: Sunday, February 21, 1999 2:00 PM
Subject: [bcc] Running Rigging

Hello,

Does anyone out there have the lengths and line diameters for all of the
running rigging on a factroy BCC, completely factory built.
I have hull #91, Crystal Swan II, and want to replace all of the running
rigging. Unfortunately I am in the middle of a major refit and a lot of my
lines are in a storage unit while I refinish my mast and boom. I want to
order new running rigging now so that I have it when I am ready to re-step
the mast.

I would appreciate any input I could get for any or you out there.

Steve
sosborne@ies.net

Free Web-based e-mail groups by eGroups.com

Free Web-based e-mail groups by eGroups.com